Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Be careful not to damage the hood and body.

Information

When removing and installing the hood, an assistant is necessary.
When removing the clips, use a clip remover.

Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B).

Fig 1: Socket Clips And Lifter
Courtesy of KIA MOTORS AMERICA, INC.
After loosening the hood hinge (B) mounting bolts, remove the hood assembly (A).
Tightening torque:

21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)

Fig 2: Loosening Hood Hinge Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
Information
- Make sure the hood locks/unlocks and opens/closes properly.
- Adjust the hood alignment.