LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Airbag Modules And Clock Spring) >> Passenger Airbag (PAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.
  2. Remove the glove box housing.

    (Refer to - "GLOVE BOX HOUSING ")

  3. Disconnect the passenger airbag connector (A) and remove the PAB mounting bolts (B).
    Fig 1: Identifying PAB Mounting Bolts
    G11812966Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the crash pad.

    (Refer to - "MAIN CRASH PAD ASSEMBLY ")

    NOTE: Replace the crash pad which is damaged while PAB is deployed.
  5. Remove the mounting bolts (A) from the crash pad. Then remove the passenger airbag.
    Fig 2: Locating Crash Pad Mounting Bolts
    G11812967Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: The removed airbag module should be stored in a clean, dry place with the airbag cushion up.
scientia non olet · About LEMON Manuals