Repair Procedures: Removal

Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Turn the Ignition Switch OFF and disconnect the Negative (-) Battery Terminal.
Remove the second row seat LH
(Refer to Body - "REAR SEAT ASSEMBLY ")
Open the floor mat (A).

Fig 1: Locating Floor Mat
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump service cover (A).

Fig 2: Locating Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel pump connector (A) and fuel tank pressure sensor (B).

Fig 3: Locating Fuel Pump Connector And Fuel Tank Pressure Sensor
Courtesy of KIA MOTORS AMERICA, INC.
Lift the vehicle.
Remove the under cover LH (A).

Fig 4: Locating Under Cover LH
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel feed tube quick-connector (A) and vapor tube quick-connector (B).

Fig 5: Locating Fuel Feed Tube Quick-Connector And Vapor Tube Quick-Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel filler hose (A), ventilation hose (B) and canister close valve connector (C).

Fig 6: Locating Fuel Filler Hose, Ventilation Hose And Canister Close Valve Connector
Courtesy of KIA MOTORS AMERICA, INC.
Support the fuel tank with jack (A).

Fig 7: Locating Fuel Tank With Jack
Courtesy of KIA MOTORS AMERICA, INC.
Remove the mounting bolts and fuel tank bands, and then remove the fuel tank (A).

Fig 8: Locating Fuel Tank And Mounting Bolts

Courtesy of KIA MOTORS AMERICA, INC.