LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Rear Wheel Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the rear wheel speed sensor connector (A).
    Fig 1: Removing Rear Wheel Speed Sensor Connector
    G11857886Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the rear wheel speed sensor.

    (Refer to Driveshaft and Axle - "REAR HUB - CARRIER ")

  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals