LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Auto Lighting Control System >> Auto Light Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw (-) driver.
  3. Disconnect the Photo & Auto Light Sensor connector (B).
    Fig 1: Disconnecting Photo & Auto Light Sensor Connector
    G11858450Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals