Repair Procedures: Inspection: Replacement

Remove the drain plug (A), allow the oil to drain out and then reinstall the drain plug.
Tightening torque:

58.9-78.5 N.m (6.0-8.0 kgf.m, 43.4-57.8 lb-ft)

Fig 1: Removing Drain Plug
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: The existing oil drain plug gasket must be replaced with new one. (Do not reuse it.)
Remove the oil filler plug (A).

Fig 2: Removing Oil Filler Plug
Courtesy of KIA MOTORS AMERICA, INC.
Fill the manual transaxle with manual transaxle oil through the filler hole.
Specified oil:

SAE 70W, API GL-4

Capacity:

1.6-1.7 L (0.42-0.45 U.S.gal., 1.69-1.80 U.S.qt., 1.41-1.50 lmp qt.)

NOTE: Make sure that oil level is at the proper level (A).

Fig 3: Locating Oil Proper Level
Courtesy of KIA MOTORS AMERICA, INC.
Install the oil filler plug (A).
Tightening torque:

58.9-78.5 N.m (6.0-8.0 kgf.m, 43.4-57.8 lb-ft)

Fig 4: Installing Oil Filler Plug
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: The existing oil filler plug gasket must be replaced with new one. (Do not reuse it.)