LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Hybrid Control System (HEV)) >> DC Fuse >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING: Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.
  1. Shut off the High Voltage circuit. (Refer to "High Voltage Shut-off Procedures ".)
  2. Remove the air cleaner assembly and duct. (Refer to Engine & Transaxle Assembly (R & I) - Optima HEV .)
  3. Disconnect the electric A/C compressor power cable (A).
    1. Pull the lever (B) in the direction of the arrow.
    2. Press the hook (C), and then pull the motor power cable connector.
  4. Remove the seal cover (D).
    Fig 1: Locating Electric A/C Compressor Power Cable, Lever, Hook And Seal Cover
    G11818677Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the DC fuse by removing mounting bolts.
Fig 2: Locating DC Fuse
G11818678Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals