LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> K900 V6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (MULTIFUNCTION Switch) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column upper and lower shrouds after loosening screws.

    (Refer to Body - "STEERING COLUMN SHROUD PANEL ")

  2. Disconnect the multifunction switch connector (A).
    Fig 1: Locating Multifunction Switch Connector
    G11801953Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the wiper & washer switch (A) by pushing the lock pin.
    NOTE: When removing the wiper & washer switch only, release the lock of wiper switch without removing the steering wheel.
    Fig 2: Releasing Lock Of Wiper Switch
    G11801954Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Locating Wiper And Washer Switch
    G11801955Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the clock spring.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  5. Loosen the screws (2EA) from the multifunction switch assembly (A).
    Fig 4: Loosening Screws From Multifunction Switch Assembly
    G11801956Courtesy of KIA MOTORS AMERICA, INC.