LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> K900 V6 >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield Glass >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the roof side moulding.

    (Refer to Body Side Mouldings - "ROOF SIDE MOULDING ")

  2. Remove the front pillar trim.

    (Refer to Interior Trim - "FRONT PILLAR TRIM ")

  3. Remove the cowl top cover.

    (Refer to COWL TOP COVER )

  4. Remove the inside rear view mirror assembly.

    (Refer to Mirror - "INSIDE REAR VIEW MIRROR ")

  5. Remove the rain sensor.

    (Refer to Body Electrical System - "RAIN SENSOR ")

  6. Remove the auto defogging sensor.

    (Refer to Heating, Ventilation, Air Conditioning - "AUTO DEFOGGING SENSOR ")

  7. Remove the LDWS unit.

    (Refer to Body Electrical System - "LANE DEPARTURE WARNING SYSTEM (LDWS) UNIT ")

  8. Using a screwdriver or ornament remover, remove the windshield glass side moulding (A).

    Information 

    • Replace the windshield glass side moulding with a new one.
    Fig 1: Locating Windshield Glass Side Moulding
    G11801457Courtesy of KIA MOTORS AMERICA, INC.
  9. Using masking tape create some alignment marks to aid in reinstallation.
  10. Cut out the windshield sealant using the sealant cutting tool (09861-31100).
    Fig 2: Cutting Out Windshield Sealant Using Sealant Cutting Tool (09861-31100)
    G11801458Courtesy of KIA MOTORS AMERICA, INC.
  11. Remove the windshield glass (B) carefully using the glass holder (A).
Fig 3: Removing Windshield Glass Using Glass Holder
G11801459Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals