Repair Procedures: Replacement

CAUTION:

NOTE:

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Be careful not to bend or scratch the trim and panels.

Remove the rear console cover.
(Refer to Floor Console - "REAR CONSOLE COVER ")
Remove the console air vent duct (A).

Fig 1: Locating Console Air Vant Duct
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the console cigar jack connector (A).

Fig 2: Locating Console Cigar Jack Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A).

Fig 3: Locating Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the console armrest complete (A) after loosening the screws.

Fig 4: Loosening Console Armrest Screws (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Loosening Console Armrest Screws (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the console armrest (A) after loosening the screws.

Fig 6: Removing Console Armrest
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Make sure the connector is connected properly.
- Replace any damage clips.