LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> K900 V6 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Assist Door Module Diagnosis >> DTC B161C-00: Right Intelligent CONN Module (I-CON) LIN Communication Error >> DTC Inspection >> GDS Data Analysis

GDS Data Analysis

  1. IG "ON" & ENG "OFF"
  2. After connect GDS, select "Oscilloscope" mode.
  3. Measure the signal waveform on ADM and RHI-CON (Passenger Integrated Connector) Serial Communication LIN line.
    Fig 1: Scantool Display - ADM And RHI-CON (Passenger Integrated Connector) Serial Communication
    G11813010Courtesy of KIA MOTORS AMERICA, INC.
  4. Does the measured signal waveform follow the specification?

    YES 

    • Fault is intermittent caused by poor contact in the RHI-CON (Passenger Integrated Connectors) and/or ADM's connector or was repaired and ADM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Go to next procedure.
scientia non olet · About LEMON Manuals