LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte5 LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Control System - 1.8L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
  3. Remove the sensor (B).
    Fig 1: Locate Engine Coolant Temperature Sensor Connector
    G11793833Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.
  4. Supplement the engine coolant (Refer to COOLANT
scientia non olet · About LEMON Manuals