LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Control System - 1.8L) >> Injector >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
    CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
  3. Disconnect the injector connector (A).
  4. Disconnect the fuel feed tube quick-connector (B).
  5. Remove the installation bolt (C), and then remove the delivery pipe & injector assembly from the engine.
    Fig 1: Fuel Feed Tube Quick-Connector & Installation Bolt
    G09748789Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fixing clip (A), and then separate the injector from the delivery pipe.
    Fig 2: Injector & Delivery Pipe Fixing Clips
    G09748790Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals