LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Control System - 1.8L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to "INTAKE & EXHAUST SYSTEM ").
  3. Disconnect the ETC module connector (A).
    Fig 1: ETC Module Connector
    G09748730Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
    Fig 2: Coolant Hoses & Installation Bolts
    G09748731Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals