LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Automatic Transaxle Control System - 1.6L) >> Inhibitor Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Forte5 and 2016 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the shift lever into the "N" position.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the battery and the battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  4. Disconnect the inhibitor switch connector (A).
    Fig 1: Locate Inhibitor Switch Connector
    G11795319Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the shift cable mounting nut (A).
    Fig 2: Locate Shift Cable Mounting Nut
    G11795320Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the manual control lever (B) and the washer after removing a nut (A).
    Fig 3: Locate Manual Control Lever
    G11795321Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the inhibitor switch (A) after removing the bolts (2ea).
Fig 4: Inhibitor Switch
G11795322Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals