LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 1.8L >> Brake Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
  2. The stop lamp switch is in good condition if there is no continuity when plunger (A) is pushed.
Fig 1: Check Continuity When Plunger Pushed
G11793952Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals