LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Power Mosfet >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch ON.
  2. Manually operate the control switch and measure the voltage of the blower motor.
  3. Select the control switch to raise the voltage until high speed.
    Fig 1: Measure Voltage Of Blower Motor
    G11793057Courtesy of KIA MOTORS AMERICA, INC.

    Specification 

    Fan Speed Motor Voltage (V)
    Manual Fan Speed Auto Fan Speed
    1 3.4 Max. 4.5
    2 4.9 4.5 ~ 5.5
    3 6.1 5.5 ~ 6.7
    4 7.2 6.7 ~ 7.7
    5 8.3 7.7 ~ 8.9
    6 9.5 8.9 ~ 10.1
    7 11.3 10.1 ~ 11.3
    8 B+

    * Manual Fan Speed: 3.4V ~ B+

    * Auto Fan Speed: 4.5V ~ B+

  4. If the measured voltage is not within specification, substitute with a known-good power mosfet and check for proper operation.
  5. Replace the power mosfet if it is proved that there is a problem with it.
scientia non olet · About LEMON Manuals