LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Timing System - 1.8L) >> Front Oil Seal >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the crankshaft damper pulley.

    (Refer to Timing System - "CRANKSHAFT DAMPER PULLEY ")

  2. Remove the front oil seal (A).
    Fig 1: Remove Front Oil Seal
    G11793135Courtesy of KIA MOTORS AMERICA, INC.
  3. Apply engine oil on the edge of new oil seal.
    NOTE: Remove any debris from the lip portion of the oil seal.
  4. Using the SST (09231-2E000), install a front oil seal (A).
    Fig 2: Install Front Oil Seal Using SST
    G11793136Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Do not reuse the front oil seal.
  5. Install the crankshaft damper pulley.

    (Refer to Timing System - "CRANKSHAFT DAMPER PULLEY ")

scientia non olet · About LEMON Manuals