LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Yaw-Rate And Lateral G Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Pull the passenger seat towards the front till the end.
  3. Disconnect the yaw rate & lateral G sensor connector (A).
    Fig 1: Locate Yaw Rate & Lateral G Sensor Connector
    G11795840Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the mounting bolts (B).

    Tightening Torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

  5. Install in the reverse order of removal.
    NOTE: In a case of replacing the Yaw rate sensor, operate "Longitudinal G Sensor Calibration" by GDS.
scientia non olet · About LEMON Manuals