LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> Communication With GDS Is Not Possible (Communication With ABS Only Is Not Possible) >> Check The Power Source Of ABS Control Module

Check The Power Source Of ABS Control Module

  1. Disconnect the connector from the ABS control module.
  2. Turn the ignition switch ON, measure the voltage between terminal 32 of the ESC control module harness side connector and body ground.

    Specification:  approximately B+

    Is voltage within specification?

    YES 

    • Check for poor ground.

    NO 

    • Check the harness or connector between the fuse (10A) in the engine compartment junction block and the ABS control module. Repair if necessary.
    Fig 1: Measure Voltage Between Terminal 32 Of ESC Control Module Harness Side Connector And Body Ground
    G11795823Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals