LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Limited >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Wheel >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
  2. Turn the steering wheel so that the front wheels can face straight ahead.
  3. Remove the airbag module.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE ")

  4. Disconnect the lock nut (A) & connector (B) and then remove the steering wheel by using special service tools. (09561-11001)

    Tightening torque:  (~2012.09.23)

    39.2~44.1N.m (4.0~4.5Kgf.m, 28.9~32.5lb-ft)

    Tightening torque:  (2012.09.24~)

    39.2~49.1N.m (4.0~4.5Kgf.m, 28.9~36.2lb-ft)

    Fig 1: Locating Lock Nut
    G11784654Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Removing Steering Wheel Using Special Service Tools
    G11784655Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION:
    • Do not hammer on the steering wheel to remove it; it may damage the steering column.
  5. Installation is the reverse of the removal.