LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Starter Relay >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Disconnect the battery negative terminal.
  2. Remove the fuse box cover.
  3. Remove the starter relay (A).
    4. Fig 1: Locating Starter Relay (A)
    G00571060Courtesy of KIA MOTORS AMERICA, INC.
  4. Check for continuity between the terminals (30 and 87) using an ohmmeter.
    Terminal Resistance Measure
    30 - 87 1MΩ or Higher If there is continuity between the terminals, replace the relay.
    Fig 2: Checking For Continuity Between The Terminals 30 And 87
    G00571064Courtesy of KIA MOTORS AMERICA, INC.
  5. Apply 12V to the terminal 85 and ground to the terminal 86 and then check for continuity between the terminals (30 and 87).
    Terminal Resistance Measure
    30 - 87 1Ω or Less If there is continuity between the terminals, replace the relay.
    Fig 3: Checking For Continuity Between The Terminals 30 And 87 With 12V And Ground Applied
    G00571068Courtesy of KIA MOTORS AMERICA, INC.
  6. Install the starter relay.
  7. Install the fuse box cover.
scientia non olet · About LEMON Manuals