LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Auto Lighting Control System >> Auto Light Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the auto light sensor (A) from crash pad upper side by using screw (-) driver.
    Fig 1: Locating Auto Light Sensor
    G11786231Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the auto light sensor connector.
scientia non olet · About LEMON Manuals