LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control Switch >> Repair Procedures >> Inspection >> Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Cruise Control Switch Connector Terminals
    G11783896Courtesy of KIA MOTORS AMERICA, INC.
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    Function switch Terminal Resistance (±5%) [kΩ]
    CANCEL 2 - 7 0.18
    SET- 2 - 7 0.33
    RESUME+ 2 - 7 0.55
    CRUISE 2 - 7 0.88
    SCC 2 - 7 2.54
  3. If not within specification, replace switch.
scientia non olet · About LEMON Manuals