LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Detection System Diagnosis >> DTC C2703-54: Control Module Slave Missing Calibration >> DTC Inspection >> Monitor GDS Data >> BSD Radar Calibration (Reference. 1)

BSD Radar Calibration (Reference. 1)

  1. Connect GDS to Data Link Connector (DLC).
  2. Ignition "ON".
  3. Select "Vehicle S/W Management"  with GDS.
  4. Select "BSD Radar Calibration" under Vehicle S/W Management.
  5. Refer to following procedure to perform Vehicle S/W Management.
Fig 1: Scantool Display - BSD Radar Calibration 1
G11787335Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Scantool Display - BSD Radar Calibration 2
G11787336Courtesy of KIA MOTORS AMERICA, INC.
Fig 3: Scantool Display - BSD Radar Calibration 3
G11787337Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals