Repair Procedures: Removal

Remove the motor & gear drive unit.
(Refer to "MOTOR & GEAR DRIVE UNIT REMOVAL AND INSTALLATION "
Remove the Electric Water Pump (EWP).
(Refer to "ELECTRIC WATER PUMP REMOVAL AND INSTALLATION ") T
Remove the accumulator mounting bolt (A).
Tightening Torque:

6.8 ~ 10.7 N.m(0.7 ~ 1.1 kgf.m, 5.0 ~ 7.9 lb-ft)

Fig 1: Accumulator Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Remove the wiring (A) from the power electric frame.

Fig 2: Power Electric Frame Wiring
Courtesy of KIA MOTORS AMERICA, INC.
Remove the LH & RH support bracket mounting nut (A, B) and then remove the Power Electric Frame (A).
Tightening Torque

49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)

78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

Fig 3: Power Electric Frame And Bracket Mounting Nut
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.