Repair Procedures: Replacement

Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
Remove the front wheel and tire (A) from front hub.
Tightening Torque:

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Fig 1: Front Wheel, Tire And Nuts
Courtesy of KIA MOTORS AMERICA, INC.
CAUTION:
- Be careful not to damage to the hub bolts when removing the front wheel and tire (A).
Loosen the bolts (A, B), and then remove the wheel speed sensor.
Tightening Torque:

6.8 ~ 10.7N.m (0.7 ~ 1.1kgf.m, 5.0 ~ 7.9lb-ft)

Fig 2: Wheel Speed Sensor Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the brake hose bracket bolts (A).
Tightening Torque:

8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1lb-ft)

Fig 3: Brake Hose Bracket Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the stabilizer link (A) from the front strut assembly after loosening the nut (B).
Tightening Torque:

98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3~86.8lb-ft)

Fig 4: Stabilizer Link And Mounting Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the cowl top cover.
(Refer to "COWL TOP COVER ")
Disconnect the front strut assembly (A) from the knuckle by loosening the bolt & nut.
Tightening Torque:

137.3 ~ 156.9N.m(14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

Fig 5: Front Strut Assembly, Bolt And Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front strut assembly and then loosen the strut mounting nuts (A).
Tightening Torque:

44.1 ~ 58.8N.m(4.5 ~ 6.0kgf.m, 32.5~43.4lb-ft)

Fig 6: Strut Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.