Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.
NOTE:
- Adding Automatic Transaxle Fluid (ATF).
  (Refer to "FLUID ")
- Perform Transaxle Control Module (TCM) learning after replacing the solenoid valve to prevent slow transaxle response, jerky acceleration and jerky startup.
  (Refer to "REPAIR PROCEDURES ")
- Replace the gasket (A) before reinstalling the valve body cover.
  
  Fig 1: Valve Gasket
  Courtesy of KIA MOTORS AMERICA, INC.