LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the resonator and the air intake hose.

    (Refer to "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the mounting bolts (C), and then remove the ETC module from the engine.
    Fig 1: Identifying ETC Module Connector, Coolant Hoses And Mounting Bolts
    G09779237Courtesy of KIA MOTORS AMERICA, INC.