Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the front/rear bumper cover.
(Refer to Body - "FRONT BUMPER COVER ")

(Refer to Body - "REAR BUMPER COVER ")
Disconnect the connector (A) from the ultrasonic sensor.
[Front Sensor, Rear Center Sensor]

Fig 1: Locate Ultrasonic Sensor Connector (Front Sensor And Rear Center Sensor)
Courtesy of KIA MOTORS AMERICA, INC.

[Rear side sensor]

Fig 2: Locate Ultrasonic Sensor Connector (Rear Side Sensor)
Courtesy of KIA MOTORS AMERICA, INC.
Pull out the ultrasonic sensor (A) by opening the sensor holder out.
[Front sensor, Rear center sensor]

Fig 3: Pull Out Ultrasonic Sensor (Front Sensor And Rear Center Sensor)
Courtesy of KIA MOTORS AMERICA, INC.

[Rear side sensor]

Fig 4: Pull Out Ultrasonic Sensor (Rear Side Sensor)
Courtesy of KIA MOTORS AMERICA, INC.