LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM), Occupant Detection System & Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the air duct (A). [Left side only]
    Fig 1: Identifying Air Duct
    G09773456Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the front impact sensor connector (A).
    Fig 2: Identifying Front Impact Sensor And Connector
    G09773457Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the mounting bolt and then remove the front impact sensor (B) and extension harness.