LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Supplemental Restraint System Control Module (SRSCM) & Sensors) >> Occupant Detecting Sensor (ODS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2015 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ODS equipped seat cushion assembly. (Refer to the FRONT SEAT ASSEMBLY Body group - Seat)
  2. Install the front passenger seat assembly.

    (Refer to the FRONT SEAT ASSEMBLY Body group - seat)

  3. Reconnect the battery negative cable.
  4. After installing the ODS, confirm proper system operation:
    • Turn the ignition switch ON the SRS indicator should be turned on for about six seconds and then go off.
    • Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the ODS does not require suppression and the passenger airbag is enabled.