LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Supplemental Restraint System Control Module (SRSCM) & Sensors) >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON nor connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning to work.
  2. Disconnect the front impact sensor connector (A).
    Fig 1: Front Impact Sensor And Connector
    G10727155Courtesy of KIA MOTORS AMERICA, INC.
  3. Loosen the mounting bolt and then remove the front impact sensor (B) and extension harness.
scientia non olet · About LEMON Manuals