LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Supplemental Restrain System Control Module (SRSCM) And Sensors) >> Side Impact Sensor (SIS) >> Repair Procedures >> Removal >> Pressure Side Impact Sensor

Pressure Side Impact Sensor

WARNING: This page is about a different car, the 2017 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON nor connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning to work.
  2. Remove the front door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Disconnect the pressure side impact sensor connector (A) and remove the pressure side impact sensor mounting screws (B).
    Fig 1: Locating Pressure Side Impact Sensor
    G11933786Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals