Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front door module.
(Refer to Front Door - "FRONT DOOR MODULE ")
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.

Fig 1: Remove Front Door Outside Handle Base
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door outside handle connector wiring harness (A).

Fig 2: Remove Front Door Outside Handle Connector Wiring Harness
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door outside handle cable (A).

Fig 3: Remove Front Door Outside Handle Cable
Courtesy of KIA MOTORS AMERICA, INC.
To remove the front door outside handle base connector (A), turn it counter clockwise and pull it forward.

Fig 4: Turn Front Door Outside Handle Base Connector
Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Remove Front Door Outside Handle Base Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door outside handle connector wiring harness (A).

Fig 6: Remove Front Door Outside Handle Connector Wiring Harness
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the front door latch connector (A).
Remove the front door latch assembly (B) by pulling it in the direction of the arrow.

Fig 7: Disconnect Front Door Latch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door inside handle cage (A).

Fig 8: Remove Front Door Inside Handle Cage
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door inside handle cable (A) by pushing it backward.

Fig 9: Remove Front Door Inside Handle Cable
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Make sure that the connectors are connected properly.
- Make sure that the door locks/unlocks and opens/closes properly.
- Replace any damaged clips.