LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Weight Classification System Diagnosis) >> DTC B1764: Body Sense MAT Defect >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

WARNING: This page is about a different car, the 2016 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "OFF", connect GDS.
  2. Ignition "ON" (Power Button LED "Red"), select "Current Data" mode.
  3. Monitor the "Read Class Status" parameter on the GDS.
    Fig 1: Scantool Display - Read Class Status (Passenger Unoccupied)
    G11947653Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Scantool Display - Read Class Status (Passenger Occupied)
    G11947654Courtesy of KIA MOTORS AMERICA, INC.
  4. Has a problem been found?

    YES 

    • Go to "Body Sensor Reset" procedure.

    NO 

    • Fault is intermittent caused by poor contact in the part's and/or SRSCM connector or was repaired and SRSCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
scientia non olet · About LEMON Manuals