LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Audio/Video/Navigation (AVN) System) >> AVN Head Unit >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2015 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the specified value of AVN head unit connectors in specified condition.
    CONNECTOR PIN REFERENCE (A)

    No. Name Terminal Description Condition Specified Condition
    A1 Rear left speaker (+) Loudspeaker Rear Left+ Needs connection to the car Analog output
    A2 Front left speaker (+) Loudspeaker Front Left+ Needs connection to the car Analog output
    A3 Front right speaker (+) Loudspeaker Front Right+ Needs connection to the car Analog output
    A4 Rear right speaker (+) Loudspeaker Rear Right+ Needs connection to the car Analog output
    A5 - -    
    A6 - -    
    A7 - -    
    A8 Illumination (+) Rheostat from vehicle + Needs connection to the car  
    A9 Detent Detent Needs connection to the car  
    A10 Rear left speaker (-) Loudspeaker Rear Left- Needs connection to the car Analog output
    A11 Front left speaker (-) Loudspeaker Front Left- Needs connection to the car Analog output
    A12 Front right speaker (-) Loudspeaker Front Right- Needs connection to the car Analog output
    A13 Rear right speaker (-) Loudspeaker Rear Right- Needs connection to the car Analog output
    A14 - -    
    A15 - -    
    A16 - -    
    A17 Illumination (-) Rheostat from vehicle - Needs connection to the car  
    A18 Remote antenna Remote Power supply for Antenna Acc on 9V ~ 18V
    CONNECTOR PIN REFERENCE (B)

    No. Name Terminal Description Condition Specified Condition
    B1 MM CAN high MM_CAN_HIGH Needs connection to the car Communication with external amp
    B2 - - - -
    B3 Parking PARKING from vehicle - -
    B4 Steering remocon Steering Wheel Remote Control Steering Wheel switch pushed 0.5V ~ 3V
    B5 - - - -
    B6 MTS key - - -
    B7 AUX video AUX Video Needs connection to the MultiJack -
    B8 AUX right input AUX Right Sound Signal External Auxiliary device is Audio playing (At time of Aux jack use) A waveform synchronized with sound is output
    B9 AUX ground AUX Reference Ground Needs connection to the MultiJack Below 1 ohm
    B10 MIC (+) Bluetooth MIC+ Input the Voice Signal via MIC A waveform synchronized with Voice data via MIC
    B11 Battery (+) Battery Always 11 ~ 14 V
    B12 Battery (+) Battery Always 11 ~ 14 V
    B13 MM CAN low MM_CAN_LOW Needs connection to the car Communication with external amp
    B14 Auto light AUTO-LIGHT from vehicle - -
    B15 P position P-POSITON from vehicle - -
    B16 Speed Speed Sensor Signal Engine switch on(IGN), car is moved slowly Approx. 5V Level Pulse Generation
    B17 Remocon ground Steering Wheel Remote Control GND Always Below 1 ohm
    B18 ACC Accessory Engine switch on(ACC) 11 ~ 14 V
    B19 AUX video ground AUX Video GND Always Below 1 ohm
    B20 AUX DETECT AUX Signal Input Detect Auxiliary device is inserted 0V(Low) → 5V(High)
    B21 AUX left input AUX Left Sound Signal External Auxiliary device is Audio playing (At time of Aux jack use) A waveform synchronized with sound is output
    B22 MIC (-) Bluetooth MIC- Input the Voice Signal via MIC A waveform synchronized with Voice data via MIC
    B23 Ground Ground Always Below 1 ohm
    B24 Ground Ground Always Below 1 ohm
    CONNECTOR PIN REFERENCE (C)

    No. Name Terminal Description Condition Specified Condition
    C1 C CAN (-) CHASSIS_CAN_LOW Needs connection to the car -
    C2 C CAN (+) CHASSIS_CAN_HIGH Needs connection to the car -
    C3 - - - -
    C4 - - - -
    C5 OBC wake up - - -
    C6 - - - -
    C7 - - - -
    C8 - - - -
    C9 - - - -
    C10 - - - -
    C11 B CAN (+) BODY_CAN_HIGH Needs connection to the car -
    C12 B CAN (-) BODY_CAN_LOW Needs connection to the car -
    C13 - - - -
    C14 Airbag AIRBAG from vehicle - -
    C15 - - - -
    C16 Navigation voice (-) NAVI_VOICE- Needs connection to the AMP Analog Audio Output
    C17 Navigation voice (+) NAVI_VOICE+ Needs connection to the AMP Analog Audio Output
    C18 Door open DOOR OPEN from vehicle - -
    C19 - - - -
    C20 - - - -
    C21 Ground Ground Always Below 1 ohm
    C22 Video ground CAMERA Video Ground Needs connection to the CARMERA Below 1 ohm
    C23 Camera video input CAMERA Video Needs connection to the CARMERA NA
    C24 Camera battery (+) CAMERA Video POWER Needs connection to the CARMERA 5V~5.5V
    USB CONNECTOR REFERENCE

    No. Name Terminal Description Condition Specified Condition
    1 USB VCC USB/iPod power USB/iPod device is inserted 4.9V ~ 5.1V
    2 USB D (-) USB D- USB device is inserted 3.2V ~ 3.45
    3 USB D (+) USB D+ USB device is inserted 3.2V ~ 3.45
    4 USB ground USB/iPod Ground USB/iPod device is inserted Below 1 ohm