LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Yaw-Rate And G Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console.

    (Refer to "FLOOR CONSOLE ")

  5. Remove the rear heating joint duct (A).
    Fig 1: Identifying Rear Heating Joint Duct
    G09773610Courtesy of KIA MOTORS AMERICA, INC.
  6. Pull up the lock of the SRSCM connector and disconnect the connector (A).
    Fig 2: Identifying SRSCM Connector
    G09773611Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the SRSCM mounting bolts (3EA) from the SRSCM, then remove the SRSCM.
    Fig 3: Locating SRSCM Mounting Bolts
    G09773612Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals