LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System Diagnosis >> DTC C2228: CAN Signal Error TCM For SCC (Check TCM) >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS to Data Link Connector (DLC), and monitor "Diagnostic Trouble Codes (DTC)".
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is the concern still present?

    YES 

    • Go to applicable troubleshooting procedure.

    NO 

    • The system is operating correctly at this time.
scientia non olet · About LEMON Manuals