Repair Procedures: Installation

Set the front tires straight-ahead before assembling the steering wheel.
CAUTION: If the steering wheel and the front tires are not set straight ahead together, the number of circulation of steering wheel may be affected or the cable inside the clock spring may be damaged.
Disconnect the battery negative cable.
NOTE: After disconnecting the battery negative cable, wait for at least thirty seconds.
Set the clock spring in center before assembling it to a steering wheel.
1. Turn the clock spring clockwise or counter clockwise until it is locked in center automatically with a clicking sound.
  
  Fig 1: Turning Clock Spring Clockwise
  Courtesy of KIA MOTORS AMERICA, INC.
2. Check the orange indicater in the clock spring.
Fig 2: Orange Indicator In Clock Spring
Courtesy of KIA MOTORS AMERICA, INC.
Connect the clock spring harness connector and horn harness connector to the clock spring.
Install the steering wheel column cover and the steering wheel. (Refer to the Steering System group - STEERING COLUMN AND SHAFT )
Connect the Driver Airbag (DAB) module connector, and then install the Driver Airbag (DAB) module on the steering wheel.
Connect the battery negative cable.
After installing the airbag, confirm proper system operation.
NOTE:
- Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
- Make sure that horn works.