Repair Procedures: Replacement
CAUTION:
Put on gloves to protect your hands.
NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.
- Loosen the mounting screw and remove the retainer (A).
- Remove the sunvisor mounting cover (A) and loosen the screw.
- Disconnect the sunvisor connector (A) and remove the sunvisor (B).
- Install in the reverse order of removal.
Information
Replace any damaged clips.