LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Sedona L >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Floor Console >> Rear Console Cover >> Repair Procedures >> Replacement

Repair Procedures: Replacement

CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the floor console assembly.

    (Refer to Floor Console - "FLOOR CONSOLE ASSEMBLY ")

  2. Remove the rear console cup mat (A).
    Fig 1: Removing Rear Console Cup Mat
    G10649974Courtesy of KIA MOTORS AMERICA, INC.
  3. Loosen the screw and remove the cup holder case (A).
    Fig 2: Removing Cup Holder Case
    G10649975Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the screw and remove the rear console cover (A).
    Fig 3: Removing Rear Console Cover
    G10649976Courtesy of KIA MOTORS AMERICA, INC.
  5. Press the locking pin and disconnect the connectors (A).
    Fig 4: Disconnecting Connectors
    G10649977Courtesy of KIA MOTORS AMERICA, INC.
  6. Install in the reverse order of removal.

    Information 

    • Make sure that the connectors are connected in properly.
    • Replace any damaged clips.
scientia non olet · About LEMON Manuals