Component Inspection

■ Perform Cooling Fan2 Actuation Test 

1. Connect GDS to Data Link Connector(DLC).
2. IG KEY "ON" & ENG "OFF".
3. Perform "Actuation Test" for cooling fan.
4. Does the Cooling fan2 operate properly? (Check variation)

   YES 

   • Go to "Verification Of Vehicle Repair " procedure.

   NO 

   • Carefully re-do this troubleshooting guide steps.
   • If no problems were found with the circuits or connectors, replace the Cooling fan2 Relay and go to "Verification Of Vehicle Repair " procedure.