Repair Procedures: Inspection: Removal

Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
Remove the second row seat LH
(Refer to Body - "REAR SEAT ASSEMBLY ")
Open the floor mat (A).

Fig 1: Floor Mat
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump service cover (A

Fig 2: Fuel Pump Service Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel pump connector (A), fuel tank pressure sensor (B) and fuel feed tube quick-connector (C).

Fig 3: Fuel Pump Connector And Fuel Feed Tube Quick-Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump plate cover (B) by using the special service tool (A) [SST NO.:09310-B8100].

Fig 4: Removing Fuel Pump Plate Cover Using Special Service Tool (09310-B8100)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the fuel pump (A).

Fig 5: Fuel Pump

Courtesy of KIA MOTORS AMERICA, INC.