LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Control System - Optima HEV) >> Injector >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2014 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE " ).
  3. Disconnect the injector connector (A).
  4. Remove the wiring harness bracket installation bolt (B).
  5. Remove the mounting nut, and then disconnect the fuel feed tube (C).
  6. Remove the mounting bolt (D), and then remove the delivery pipe & injector assembly from the engine.
    Fig 1: Injector Connectors, Fuel Feed Tube & Mounting Bolts
    G08312875Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the fixing clip (A), and then separate the injector from the delivery pipe.
    Fig 2: Fixing Clips
    G08312876Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals