Neutralization Status Check

WARNING: This page is about a different car, the 2014 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.

After IG ON, select the "Neutralization mode".

Fig 1: Display - Neutralization Mode

G08309069

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Display - Neutralization Mode Screen

G08309070

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Display - ECM Neutralization (With Input Code)

G08309071

Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Display - ECM Neutralization Test Completed Message

G08309072

Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Display - SMK Neutralization Screen (Without Input Code)

G08309073

Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Display - SMK Neutralization Screen (With Input Code)

G08309074

Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Display - SMK Neutralization Test Completed Message

G08309075

Courtesy of KIA MOTORS AMERICA, INC.

INPUT SWITCH LIST

No	Item name	Unit
1	SSB SW1	-
2	SSB SW2	-
3	ACC	-
4	IGN1	-
5	IGN2	-
6	ACC/IGN1/IGN2 Relay	-
7	Gear 'P' Position (A/T) Clutch SW (M/T)	-
8	Brake SW	-
9	FL Door Lock Button	-
10	FR Door Lock Button	-
11	Trunk Release Button	-
12	Battery Voltage	-
13	Wheel Speed	-

ACTUATOR LIST

No.	Item name	Condition
1	External Buzzer	Ignition switch ON Engine off
2	Interior Antenna 1 Active	Ignition switch ON Engine off
3	Interior Antenna 2 Active	Ignition switch ON Engine off
4	Trunk Antenna Active	Ignition switch ON Engine off
5	Bumper Antenna Active	Ignition switch ON Engine off
6	DRV_DR Antenna Active	Ignition switch ON Engine off
7	AST_DR Antenna Active	Ignition switch ON Engine off
8	BBS Illumination (OFF/ACC/ON)	Ignition switch ON Engine off
9	ACC/IGN1/IGN2 Relay	Ignition switch ON Engine off