LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima LX >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) Diagnosis - Optima (Except HEV) >> DTC B1602: CAN Error >> Verification Of Vehicle Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "DTC Analysis" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC outputted again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals