LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Optima HEV >> Camshaft Position Sensor (CMPS) >> Repair procedures >> Removal >> [Bank 1 / Intake]

[Bank 1 / Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    Fig 1: Camshaft Position Sensor Connector & Mounting Bolt (Bank 1 / Intake)
    G08312858Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals