LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System - Optima HEV) >> Engine Coolant Temperature Sensor (ECTS) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Engine Coolant Temperature Sensor Connector
    G08312847Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the fixing clip (A), and then pull the sensor from the water temperature control assembly.
    Fig 2: Sensor Fixing Clip
    G08312848Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: Note that engine coolant may flow out from the water temperature control assembly when removing the sensor.
scientia non olet · About LEMON Manuals