LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2015 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transaxle Control System - Optima HEV) >> Transaxle Oil Temperature Sensor >> Repair procedures >> Installation

Repair procedures: Installation

WARNING: This page is about a different car, the 2014 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is the reverse of removal.
    NOTE:
    • Do not reuse the drain plug gasket and the valve body cover gasket, oil cooler tube washer.
    • Perform the procedures below after installing
    1. Refill the automatic transaxle with fluid. (Refer to FLUID )
    2. Refill the engine & transaxle cooling system with coolant. (Refer to COOLANT )
    3. Refill the hybrid motor cooling system with coolant and then perform the air bleeding using the GDS. (Refer to COOLANT )
    4. Reset the automatic transaxle adaptive values using the GDS.
    5. Confirm the coolant leak or fluid leak from the hose connections part in state of engine start.
scientia non olet · About LEMON Manuals